I made it. 
missing/deleted image from Google+
@Gerlinde_Habekotte ā I see youāre back up and running! Just donāt leave those thick power wires without ferrules for too long. See the differenceā¦
Oh and to be fair, My wiring here isnāt all that pretty.
missing/deleted image from Google+
Somthing like this @Duncan_Gunn ā ?
missing/deleted image from Google+
@Gerlinde_Habekotte The heatshrink makes it all look pretty and to some extent restricts the possibility of a short to any exposed neighbouring conductor. I canāt see if thereās a crimp on the end which I would heartily recommend. As long as the wire ends arenāt tinned before fitting Iād say that is a step in the right direction.
Tinned wires creep out of screw terminals which is bad. For the truly paranoid there are also prescribed torque settings for the terminals too but I only do that where necessary.