I’ve lowered the fan shroud, I’ve seasoned the nozzle with oil…and still had prints fail. I started printing printer parts for an Ingentis printer I want to make next and it’s printing perfectly. I suspect the issue is tuning retraction and possibly temp as I’ve lowered it to 180…but I’m suspecting retraction.
Try turning the retraction off and clean up the little hairs after the print. This works for all the different hotends I have ever tried. You also have to be sure you have a good filament pusher.
Where’s retraction in Kisslicer? I couldn’t find it…
@Mike_Miller it’s ‘suck’ in the material tab. You need to set prime to the same value.
ahhhh, that’s interesting. I had prime set to 1.25 and suck to 2.0, that by itself could exacerbate the problem