Anyone know of a good blower fan that is around 7mm thickness and not

3D Printing
, , ,
1

Anyone know of a good blower fan that is around 7mm thickness and not bigger than 25x25mm square? I know Sunon has the micro blowers, but they’re expensive. Any tips appreciated!

2

Not seeing anything in those dimensions. This is a good tool to narrow things down. http://www.digikey.com/product-search/en/fans-thermal-management/dc-fans/1179730?k=&pkeyword=&pv790=2&pv790=10&FV=fff40012%2Cfff80052&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25http://www.digikey.com/product-search/en/fans-thermal-management/dc-fans/1179730?k=&pkeyword=&pv193=1228&FV=fff40012%2Cfff80052%2Cc580002%2Cc58000a&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

3

Not sure about the thickness, but found a 25mm square fan. Checking RS Online showed that actually Sunon was the best option there (some by other brands were more pricey and with less flow).
https://www.bcn3dtechnologies.com/en/catalog/extruder-fan-plus-bcn3d/

4

@Shai_Schechter ​
What do you mean when you say “expensive”?
2€?
5€?
10€?