Benchy from my CoreXY, print time 1h 4min,

3D Printing
,
1

Benchy from my CoreXY, print time 1h 4min, slight ringing from a shaking print bed, but all in all quite nice :slight_smile:

7b7b6e4b5b2a31eff5c5776295a3731e.jpeg
7b7b6e4b5b2a31eff5c5776295a3731e.jpeg2608×1960 842 KB

d9249e7386158c1884f58bf48904240a.jpeg
d9249e7386158c1884f58bf48904240a.jpeg2608×1960 916 KB

2525b81faa9e588a62e078cfc854876c.jpeg
2525b81faa9e588a62e078cfc854876c.jpeg2608×1960 843 KB

cacb5e16c159d97957d7a2dae1a45afe.jpeg
cacb5e16c159d97957d7a2dae1a45afe.jpeg2608×1960 789 KB

0566a661b68b674f276aea77ae5e9f45.jpeg
0566a661b68b674f276aea77ae5e9f45.jpeg2608×1960 732 KB

9ba34e09d028e928cd988b31a1713c4d.jpeg
9ba34e09d028e928cd988b31a1713c4d.jpeg2608×1960 672 KB

d9f992b0759cc1e1cbad7a9da69ca771.jpeg
d9f992b0759cc1e1cbad7a9da69ca771.jpeg2608×1960 996 KB

2

Do you live in the usa

3

Looks good :slight_smile: What are the dimensions of the printer and at what settings did you print (acc, jerk, junction deviation)?

4

@Sean_Kennedy nope, I’m from germany

5

@Rene_Jurack Printer size is 320mmx400x210, print size is 200x200x110 , complete own design. acc:6000, jerk:15 (could do a lot more, 60 is no problem, but then the printbed starts shaking too much), running on Marlin, sliced with CURA, max speed 60mm/s perimeter, 90mm/s infill, ABS at 200°C (maybe my temp sensor is off, can print ABS at 190°?)