Bounty ! Get a free Smoothieboard v1 and Smoothieboard v2 in exchange for a

3D Printing
, , , ,
1

Bounty ! Get a free Smoothieboard v1 and Smoothieboard v2 in exchange for a PCB design :slight_smile: Please reshare to your PCB-designing friends :slight_smile:

I’m offering one v1 board and one v2 board ( when available ), to the person that will design the following PCB :

  • One-sided PCB, can be CNC-milled at home ( like http://reprap.org/wiki/Gen7 )
  • All components PTH, except for the microcontroller ( LPC1769 to run Smoothieware )
  • Pololu sockets for 5 drivers
  • USB connector
  • SD card socket
  • 6x Endstop inputs, 4x Thermistor inputs
  • 4x Mosfet able to handle at least 12A with adequate connectors
  • 2x fan controllers
  • ATX PSU main power input
  • Connectors for Reprapdiscount GLCD
  • As compact as possible
  • Must be Open-Hardware ( CERN OHL )

It’s time we had a Smoothie-based CNC-millable PCB, for the hardcore DIYers :slight_smile:

Please reshare, it’ll help get this done :slight_smile:

2

Does this mean we are getting close to a Smoothieboard V2??? :slight_smile:

3

@Ryan_Fritts We are getting closer everyday, but I still have no idea when it’ll be ready.

4

Is it possible to use LPC1769 expresso board? :slight_smile:
And why PCH only?

5

LPC1769 expresso is pretty expensive.
PTH only because this is essentially a Smoothie version of the Gen7 electronics

6

Mill pcb for LPC1769 not so easy.
I’m unable to get clear results using Openbuilds C-Beam Machine.