Christmas Gift
this box is a spools dryer box. Puts the spoolsl inside, 2 hours at 60 ° C for PLA and 2 hours at 80 ° C for ABS, before starting printing, then the spools remaining at warm dried air inside until the end of printing. The box has also a metercounter so that at the end of the printing change spool and write measure on the spool. We have made first tests and the results are amazing. With Standard PLA have increased the print speed, we increased also 50% filament flow without bolt screw problema. On ABS we obtained zero deformation and warpage problems. These was first test, new test will be make next days.