CNC Noob here, I had my OX CnC with tinyg V8/chilipeppr running pretty good

CAD & CAM Tool Chain ChiliPeppr
1

CNC Noob here, I had my OX CnC with tinyg V8/chilipeppr running pretty good but a problem has popped up

My “X” jog locks everything up - tinyg will not respond to any jog or G-code execution after pressing the “X” job buttons

However I can energize the motors with the “hold” (lightning bolt) button

Since energize works I’d like to rule out hardware

After machine “lock up” I can watch the Buffer and Char Mode reduce with each request I make after “lock up”

JSON 1.92
TinyG_v8 440.20
Win7x64
Chrome 49.0.2623.112 m

Any debugging tips/procedures would be appreciated!

2

What do you have the jog distance set to? Try setting to 1.

3

Thanks for the reply - I figured it out, somehow my axis setting had max jerk at 0mm/min^3. Must have been a late night typo.

Thanks for the reply - all is working well and I’m back to practicing with fake passes