Common Laser4Web issues and their solutions. Please follow along in the threads bellow. ***Comments have been disabled so users don’t get confused. If you have any of this issues and want to discuss them further please create another post.
First documentation is available here. I cannot stress enough how important this is. Most issues are because of bad settings / config.
https://cncpro.yurl.ch/
- Make sure you start with one of the machine profile examples under settings based on your board. This have the basic values needed for it to generate the appropriate gcode.
-LaserWeb app loads only to a white screen
https://plus.google.com/100075568232518942576/posts/WQHxyQCF2Sf
-LaserWeb loads but there’s no grid
Verify that WebGL is running on your machine and that you have a good video card. (This happens motlly on old machine or machines with integrated video cards )
-I get an error saying in the second line EADDRINUSE:::8000
Most likely you have another app using default port 8000 already running. Try restarting the machine
- SVG files take to much time to load and generate gcode > read this https://plus.google.com/112744897452366627400/posts/6tXMdxsUo1v