Create a Timelapse of your 3D Print with RepRapWeb If you are running BSD

Andrew_Hodel · September 11, 2015, 7:31pm

Create a Timelapse of your 3D Print with RepRapWeb

If you are running BSD or Linux here’s a timelapse script I just wrote for RepRapWeb or GRBLWeb:

andrewhodel/reprapweb/blob/master/rrw_timelapse.sh

#!/usr/bin/env bash

if [ -d "timelapse" ]; then
	echo "Please remove the ./timelapse directory and re-run this script"
	echo ""
	exit
fi

# exit if user gave no args
if [ $# -eq 0 ];then
	echo "RepRapWeb Timelapse Script"
	echo "USAGE:"
	echo "./rrw_timelapse.sh 192.168.0.50 1 4"
	echo "----"
	echo "The example above would create a timelapse from the RRW instance"
	echo "running at the IP Address 192.168.0.50.  Every 1 second a snapshot"
	echo "would be taken and 4 snapshots would go into each second of video"
	echo "----"
	echo "The script will create a directory named timelapse containing all"
	echo "of the timelapse images and a timelapse video named timelapse.mp4"

This file has been truncated. show original

You just need ffmpeg and wget.

*Create a Timelapse of your 3D Print with RepRapWeb* If you are running BSD

Create a Timelapse of your 3D Print with RepRapWeb If you are running BSD