Does anyone know (definitively) if the new EPCOS 100k 1% thermistors ( http://www.mouser.com/ProductDetail/EPCOS/B57540G104F/ )

3D Printing
, , ,
1

Does anyone know (definitively) if the new EPCOS 100k 1% thermistors (http://www.mouser.com/ProductDetail/EPCOS/B57540G104F/) use the same legacy temperature profile as the one in Marlin? I know they discontinued the old kind.
http://www.mouser.com/ProductDetail/EPCOS/B57540G104F

2

The TDK/EPCOS data sheets are available online. They have tabular data you could put into one of the table generators and compare.

3

Unfortunately, the tables in Marlin correlate temperatures to ACD values, so it’s not the easiest thing to compare them to the tables found in datasheets.

4

I guess you’d have to dig up the data sheet for the old ones too and compare their respective table values, just by reading the data sheet, I.e. Without having to do conversions.