Dual Z Stepper - 1 Hot 1 Cold?

Controllers Smoothie
1

Hi all,

I am running Dual Z Steppers, i am using the Z Stepper Driver and Also the E2 Driver - So one per motor, the E2 motor is driven by linking the External Driver Connections On the Z & E2, both the Delta & Epsilon Currents are set to 1.0A in the config file.

However i am finding that one motor is warm whilst the other is stone cold, does anyone know why this would be the case?

For Reference the warm stepper is the one being driven from the Z Stepper Driver.

Any help would be greatly appreciated.

Thanks

Alex

Imported from wikidot