Endstops register fine with M119, Delta printer won't stop after G28

Controllers Smoothie
1

I’m going into day 3 just trying to get my delta to home. It’s been a really frustrating experience to say the least.

Here are some of the main issues I’ve been having:

  • My endstops are supposed to be working properly (checked with M119), but when homing one of the axis’ (random) will just keep going and crashing into the endstop.

  • Cannot connect to Repetier Host or Pronterface, no matter what (I did unmount the SD card). I could only get it to connect using Simplify3D.

  • The reset button on Simplify3D doesn’t stop the printer, I have to reset the board itself to stop the constant crashing.

Any help is appreciated,

Alex

Imported from wikidot

2

Update:

  • Endstops X and Y were switched. (I wasted 2 days thanks to my own stupidity.). Printer homing fine now.

  • To connect to Repetier Host: Got the Config Menu>Printer Settings (or Ctrl+P)>Connection Tab>Reset on Connect = Change to “Due native USB port”.

Alex

3

Hey there !

Pronterface should work too, it’s our most supported host.

Also, not sure about the reset button in Simplify3D, but you can manually send the “reset” command to reset the board if you want.

Cheers.