Finally tested a Direct Drive Extruder on the Deltesian, and the Design handles it amazingly! https://gfycat.com/VelvetySpiffyItalianbrownbear Just tested with a Nema 17 40Ncm stepper mounted above the Effector. The center of gravity is too high and causes a small amount of roll, but there’s about 20mm between the bottom of the stepper and the top of the heatsink that could be eliminated.
The Deltesian Project is an ongoing project. We are working towards an open-source-non-commercial release of the entire project.
If you have any questions about the project please don’t hesitate to ask!
If you are interested in being involved, please join us on the Deltesian Discord: https://discord.gg/4GJpdvs