Fixed my stepper driver issues.
Ran out of thick solidcore-wire, so I’ll have 8 more wires to do next week. Then the new electronics for my TravelCNC will be done and I can test it.
Sound proofing with Basotect Acoustic Foam is prepared but not done yet.
3D printing is prepared and should work with a simple Mach3 plugin (or without such a plugin and some search&replace in the G-code).
I still want to replace my 10A power cable with a 16A one.
The ICE sockets are easy to get…but the cables with 16A IEC plug come at a premium. 
Not because the CNC draws so much power but because the flight case shall include a bar with 6 IP54 weather proof power sockets for other devices. These will often be power-tools.