Full BOM is up for HercuLien
Originally shared by Eric Lien
BOM is up for HercuLien
https://github.com/eclsnowman/HercuLien/wiki/BOM
great !
gonna build this printer and introduce it in the german reprap community
@Jo_Miller I am excited to hear about your progress. Let me know if you have any question along the way.
Hello Eric, Great printer. I have started my build and have been working through the BOM sourcing the parts required.
I do have a question concerning the Silicon heater and the thermistors you selected as this information seems to be missing from the description for the item.
I used one from alirubber (http://alirubber.en.alibaba.com/). Here is the description I sent them:
1 of the 380x380, 120v ac, 800w, adhesive back, 1.5meter cable, dual thermistor. I also sent them this picture: http://i.imgur.com/0H8DRbz.jpg
Total cost was $34.3+$36.4 shipping to Minnesota, USA. I would actually recommend going with 700W instead. I had to turn down my max bed output in marlin to essentially 700W to avoid overshoot during PID tuning.
To purchase email: Daisy Huang (daisyhuang@alirubber.com.cn). It is likely not his/her real name, but she is great to work with.
@Eclsnowman Thank you for the information, will try the 700W version you recommend. I am looking forward to this build.
@Eclsnowman
Daisy was quick to reply, $33.80 for 700W version + $26 shipping to Canada. Will place the order when I hear back from her again.