Google+ post by Cristian Martinez on 2017-12-30 23:23:15 UTC

Cristian_Martinez · December 30, 2017, 11:23pm

Ooooooo yeah…

Cristian_Martinez · December 30, 2017, 11:33pm

@Garrett_Mace

marmil · December 31, 2017, 12:06am

Oh yes, someone is ready for New Years Eve!

Cristian_Martinez · December 31, 2017, 12:08am

@marmil you know it!

nwestwind · January 10, 2018, 3:26am

I made a bunch of effects for mine check out the list and copy the effect from the efffects.h it is a tad messy and very few comments.

github.com

nwestwind/rgbShadesAudio/blob/master/RGBShadesAudio.ino

//   RGB Shades Audio Demo Code - REQUIRES MSGEQ7 AUDIO SENSOR
//   Copyright (c) 2015 macetech LLC
//   This software is provided under the MIT License (see license.txt)
//   Special credit to Mark Kriegsman for XY mapping code
//
//   Use Version 3.0 or later https://github.com/FastLED/FastLED
//   ZIP file https://github.com/FastLED/FastLED/archive/master.zip
//
//   Use Arduino IDE 1.0 or later
//
//   If your RGB Shades were purchased before July 2015:
//     This version has the standard Arduino bootloader. R9 and R10 near the control buttons will be present.
//     Select the “Arduino Pro or Pro Mini” option.
//     Then, go back into the Tools menu and find the Processor option and select “ATmega328 (5V, 16MHz)”.
//
//   If your RGB Shades were purchased after July 2015:
//     This version has the Optiboot bootloader. R9 and 10 near the control buttons will be missing.
//     Select the “Arduino Mini” option.
//     Then, go back into the Tools menu and find the Processor option and select “ATmega328”.
//

This file has been truncated. show original