GRBL Autolevel widget - continuation:

sszafran · May 25, 2016, 10:00am

GRBL Autolevel widget - continuation:

Coming back to last week post below may I ask you to test http://chilipeppr.com/grbl-new workspace Autolevel widget (currently v.0.2.1).

I made basic 16 locations probing test with Arduino Uno flashed with grbl 0.9j and two wires between A5 and GND but no stepper motors and no cnc connected. Test Probe and Probing process went OK according to Pre-Run parameters defined, Post-Run buttons acts as expected, but I have no chance to test with real hardware.

Originally shared by Sebastian Szafran

Many of you asked that question in the past. GRBL Autolevel widget is working again in Chilipeppr, enjoy
https://youtu.be/pPISe5RilPs

sszafran · May 25, 2016, 1:18pm

@Emile_Daneault you may wish to test the widget.

Camilo_A_C · May 30, 2016, 10:53pm

What is the workspace?

sszafran · May 31, 2016, 2:05am

@Camilo_A_C Please try: http://www.chilipeppr.com/grbl-new

Camilo_A_C · May 31, 2016, 10:56am

Thanks. I will test it.

Camilo_A_C · June 5, 2016, 4:43pm

Thanks a lot. Auto-level works fine in GRBL.

sszafran · June 6, 2016, 8:56pm

@Camilo_A_C Thanks a lot for testing. I’m happy to hear that it works.