Has anyone upgraded their k40 with MKS SBASE board? It’s different then smoothie but uses the same firmware. But while looking at it I noticed there’s a jumper for 3.3volt and 5 volt would this mean I don’t need the logic converter?
@Derek_Schuetz I have a azsmz board that does not appear to need the logic converter. I have being able to run the laser without power control and in the middle of connecting power to finish. Just at the point where laser always fires
@Ariel_Yahni_UniKpty could you send me some picture or a quick diagram I can follow. That board is different then mine. I didn’t get that board because it was a 12v so i got the other one that can do 24v
mine is 24v also. Post a pic of your PSU and nano board