Have spent the weekend printing Aria The Dragon by loubie.

3D Printing
,
1

Have spent the weekend printing Aria The Dragon by loubie.

Started with Aria The Dragon (for dual extrusion) had only black and yellow ABS filament and it proved impossible to purge out all the black without having an extremely large purgetower. Tried with 0.6mm nozzle 0,35mm layer and 28mm purgetower.
Printed a nice yellow Aria Dragon yesterday scaled to 175mm height, printed with 0.6mm nozzle 0,25mm layers.

85365d822573ded328e3063080f21b18.jpeg
85365d822573ded328e3063080f21b18.jpeg3872×2592 3.7 MB

dd8a74c28600e608a0e69c8cb83017b3.jpeg
dd8a74c28600e608a0e69c8cb83017b3.jpeg3872×2592 3.08 MB

66600802aff5be18e62c23da7e98a326.jpeg
66600802aff5be18e62c23da7e98a326.jpeg4128×2322 1.47 MB

1fb918b929b8c927f2fc7c1cf8bac98e.jpeg
1fb918b929b8c927f2fc7c1cf8bac98e.jpeg3872×2592 3.17 MB

ee6a90b780f412305a0070ce36f461c3.jpeg
ee6a90b780f412305a0070ce36f461c3.jpeg3872×2592 2.87 MB

ed75cdcc15f221456d8a1f538663a4bd.jpeg
ed75cdcc15f221456d8a1f538663a4bd.jpeg3872×2592 2.89 MB

50f7cf08d6c233b2a30879c3a2575f34.jpeg
50f7cf08d6c233b2a30879c3a2575f34.jpeg3872×2592 2.89 MB

d2eff2fc94070b5c30c95025cd9547af.jpeg
d2eff2fc94070b5c30c95025cd9547af.jpeg3872×2592 3.17 MB

e1aa1ed54014774d8f6d45d844c5b267.jpeg
e1aa1ed54014774d8f6d45d844c5b267.jpeg3872×2592 2.91 MB

2

Very nice prints. I think the dragons are perfect for testing printers, and look good to boot when everything falls into place