Hey guys, I know a few people here have been interested in the carriage

3D Printing
,
1

Hey guys, I know a few people here have been interested in the carriage wheels we use for our Deltaprintr, so we decided to make them available on our site. They work with Misumi 1515 Aluminum extrusions, but based on what other members told me the gap of the open beam was, it should work with open beam as well. Maybe @Terence_Tam can help confirm this? The wheel’s tip is 4.5mm wide at the base and 2.5mm wide at the tip. So, therefore any aluminum extrusion that is between those two ranges should most likely work.

You can grab them here: http://deltaprintr.com/shop/hardware/carriage-wheel/
http://deltaprintr.com/shop/hardware/carriage-wheel

2

Hi Shai, how likely are the wheels to arrive in CA by Friday if I ordered them now? I’ve got a friend there but he’s moving on on Saturday… Cheers!

3

Hi Petr, all the wheels that have been ordered so far up to today have been shipped. We shipped some yesterday. Email me at info@deltaprintr.com and I can get you the tracking number.

4

Thanks for the reply. I was actually asking if you think my order could arrive in CA by Friday? I haven’t ordered yet. I don’t have much experience with postage within US… If the order didn’t arrive by Friday I’d be in trouble as there would be nobody there to pass it on to me :slight_smile: If they’re not very likely to get there on time I’ll rather get them shipped straight to me to EU, the new rate is very decent.

5

Petr, we usually ship flat rate. Flat rate usually takes 2-3 days to arrive. If memory serves me right, there should be other faster shipping methods on our site, otherwise I would order it to the EU since 2-3 days isn’t a guarantee.