@Kevon_Daines I’ve never used cubic meters to measure the amount of filament used on a project. The measurements that make the most sense to me would be weight (grams) and filament length (meters). This project will be roughly 500 grams when completed which is about 167 meters of filament by my calculations.
@Jeff_Parish 41% done. 168 hours in. The front wheels are starting to close the circle. missing/deleted image from Google+
Progressing. This is like a time lapse at actual speed. 
Hahahahaha
@Daniel_Jackman I understand. since the project seems to be solid, it will have a reference here ( Dutch country ) as either m³ or m² . I think grams will be only a matter of weight compensation here. If the project needs to be lightweight. But looks good , keep us updated. Am still pondering on which type of printer to buy.
49% and 195 hours in.
missing/deleted image from Google+
missing/deleted image from Google+
missing/deleted image from Google+
Had a small snag. Around 205 hours in, the power at my house went out and the print stopped. Not to worry though! I pulled some tricks with the GCODE and got it back up and running. I dare say that you can’t even tell where the print had stopped. Unfortunately, this reset the clock and the completed percentage. It’s looking good though! The front wheels are completed. missing/deleted image from Google+
missing/deleted image from Google+
missing/deleted image from Google+
It’s doing great!!missing/deleted image from Google+
Good job
Completed! 365 hours to complete! Now the large task of cleaning off the supports. missing/deleted image from Google+
missing/deleted image from Google+
missing/deleted image from Google+
Wow! Time the support removal.