Just started playing with the Ultimaker². So far I am extremely impressed.

Paul_Candler_BlueBot · November 11, 2013, 10:27pm

Just started playing with the Ultimaker².

So far I am extremely impressed.

For example the scaled down “Okay” hand model by Cyclone, that I like to print to demonstrate to the public what filament printers can do, have just got a whole lot smaller. From 10% down to 7% scale.

Big congratulations to the Ultimaker family.

Printed one hand on its own, because it could do it

Unfortunately the tablet wanted to focus on the lighter.

Paul_Candler_BlueBot · November 11, 2013, 10:43pm

For reference it is 13mm tall, or for those across the pond 0.51 inches.

Dave_Head · November 11, 2013, 10:59pm

I can proudly say I had the chance to meet Paul and got a little ok hand which is class really nice to meet you Paul

Paul_Candler_BlueBot · November 11, 2013, 11:19pm

Hi Dave, It was great to finally meet you although I was so tired at that point I only fully realised who you were later, and I’ve been wanting to meet you for most of my rather short printing career.

I handed out over a thousand of those 10%scale hands at the 3dprintshow London. The children loved them.

Tim_Rastall · November 11, 2013, 11:25pm

I would love to see the marlin settings that the Ultimaker2 uses, any chance you could share? I’ve not found them via googling.

Paul_Candler_BlueBot · November 11, 2013, 11:27pm

I don’t have access to them sorry.

Tim_Rastall · November 11, 2013, 11:43pm

No bother - found it myself after further googling

github.com

Ultimaker/Ultimaker2Marlin/blob/master/Marlin/Configuration.h

#ifndef CONFIGURATION_H
#define CONFIGURATION_H

// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration

// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#ifndef STRING_CONFIG_H_AUTHOR
#define STRING_CONFIG_H_AUTHOR "Version DEV" // Who made the changes.
#endif

// SERIAL_PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins.
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0

This file has been truncated. show original

Paul_Candler_BlueBot · November 11, 2013, 11:46pm

The mighty Google…

Ali_Al-Weqaiyan · November 12, 2013, 4:15am

I have an Ultimaker2 on the way, it will be my very first 3D printer, seeing this got me even more excited to start printing!

Peter_Parnes · November 12, 2013, 7:37am

Cannot wait until I get mine