Looking to buy a second printer and i was looking at the CR-10S but

3D Printing
, , ,
1

Looking to buy a second printer and i was looking at the CR-10S but i recently watched a video by Make Anything about the JGAurora A5 and now im undecided. What do you guys think?

2

What’s your first printer? And have you considered the Original Prusa i3 Mk3?

3

Prusa i3 MK2S

4

Looking for something with a bigger print volume

5

I own a CR-10S. It is my personal first. My wife has a number of printers, including an original MK3 and a Dolly.
I have upgrade my CR-10S with a 230V bed, but didn’t use the standard connectors as seen in some videos. Very dangerous. Those connectors aren’t suitable for 230V. I used a C14 plug on the cable and put a C13 in the control box. (Be sure to use it that way around to prevent live wires)
I added a BTTouch, but haven’t set up that one, because I am considering putting all electronics under the CR-10S. Whether to go with the Standalone Kit on thingiverse or build a housing with 202 and 2040 aluminum I don’t know yet.

6

@David_Sherwood so would you say the JGAurora would be the better option if i were looking to upgrade the stepper drivers?

7

Print quality really seems similar on the two. If I were to buy one I would go for the CR10S

8

CR10S for the safety?