My two latest OpenR/C F1´s thata i made for a upcoming trade show.

3D Printing
,
1

My two latest OpenR/C F1´s thata i made for a upcoming trade show. I made some stickers to add that final touch. I´m really happy with how thay came out.

Originally shared by Daniel Norée

Stickers added to my 3DPrinted OpenR/C F1 cars for a upcoming trade show. Still some missing, i´ll see if i have time to add them but i think they still look pretty good anyway, what do you guys think?

d5f1b47a135057dad700dabe0a62bd9f.jpeg
d5f1b47a135057dad700dabe0a62bd9f.jpeg4000×2248 3.9 MB

9d689ac5107a1ca0a747d76395a075c1.jpeg
9d689ac5107a1ca0a747d76395a075c1.jpeg4000×2248 4.01 MB

f89f2c11f0118b776b8f9b6a00def6ac.jpeg
f89f2c11f0118b776b8f9b6a00def6ac.jpeg4000×2248 3.66 MB

1aeb7c2f98e2115dc15e0556fec7da6d.jpeg
1aeb7c2f98e2115dc15e0556fec7da6d.jpeg4000×2248 3.95 MB

d6d704d5034d6efb7af1ee4875d28271.jpeg
d6d704d5034d6efb7af1ee4875d28271.jpeg4000×2248 4.07 MB

3e5bd0b72b6fb84843b7834f5b5cedbe.jpeg
3e5bd0b72b6fb84843b7834f5b5cedbe.jpeg4000×2248 3.43 MB

2e13e6d4e1e12edd16c0a9bda01a428c.jpeg
2e13e6d4e1e12edd16c0a9bda01a428c.jpeg4000×2248 3.94 MB

b3a5286aa14eabf77c8698b0a3577eb5.jpeg
b3a5286aa14eabf77c8698b0a3577eb5.jpeg4000×2248 2.84 MB

fde387f0ba2618f5b844b5aaec4255e9.jpeg
fde387f0ba2618f5b844b5aaec4255e9.jpeg4000×2248 2.92 MB

489014e6fdf0cfeb88c79672f31d58b4.jpeg
489014e6fdf0cfeb88c79672f31d58b4.jpeg4000×2248 3.3 MB

b05fe04f66917b2786a9d3282d79afe2.jpeg
b05fe04f66917b2786a9d3282d79afe2.jpeg4000×2248 3.5 MB

a022f338b40d1ecaa56fc9b311a5dc83.jpeg
a022f338b40d1ecaa56fc9b311a5dc83.jpeg4000×2248 4.09 MB

2

The Benchy silhouette is a nice touch.

3

How’d you get the stickers to stick? My stickers and tape often fall right off PLA.

4

@Tim_Visible They are tricky to apply because they sticker better to the “tape” but once the tape is removed i put some pressure on the vinyl with my fingers and then they stick quite well after that
.