Originally shared by Joshua Updyke Some results of my new Form 1 3d printer.

3D Printing
,
1

Originally shared by Joshua Updyke

Some results of my new Form 1 3d printer. So far the resolution seems amazing. The software is pretty easy to use as well and out of the box we didn’t have much trouble setting it up.

I have had a few parts not stick to the build platform, but that is not too uncommon and I have had the same issue with my RepRap and Makerbots. I think it is a matter of getting the settings right and learning the machine. But here are some photos.

5e6421c9f5d78232523404061d524fce.jpeg
5e6421c9f5d78232523404061d524fce.jpeg2048×1536 527 KB

9f6abca0e397852cc9be5331b68e170d.jpeg
9f6abca0e397852cc9be5331b68e170d.jpeg2048×1536 278 KB

e94706caeb8b9d43f45b3c9611201ecf.jpeg
e94706caeb8b9d43f45b3c9611201ecf.jpeg2048×1536 398 KB

81f69c8d5166ff86252d44ae59ff2b54.jpeg
81f69c8d5166ff86252d44ae59ff2b54.jpeg2048×1536 408 KB

11fd4e1a6043ff5bd3fd1ab059730080.jpeg
11fd4e1a6043ff5bd3fd1ab059730080.jpeg2048×1536 333 KB

96ca234ac615ad9586071db62defe0d0.jpeg
96ca234ac615ad9586071db62defe0d0.jpeg2048×1536 365 KB

dcb2fdc270488663224f53e533a04a49.jpeg
dcb2fdc270488663224f53e533a04a49.jpeg1536×2048 305 KB

2

those do look sexy

3

There was a form labs at our last 3D printing meetup, it also had a few parts fall into the juice. Do the parts harden nicely in the window? All the successful parts I saw were still soft.

4

It’s a messy process to print with, gloves, chemicals, smells and sticky parts but quality prints

5

Yes, it’s a SLA 3D Printer… you need to clean parts after printing and post-cured them.