Originally shared by Marvin Stuart Another Project Completed  30w 5v 8a open frame power

3D Printing
,
1

Originally shared by Marvin Stuart

Another Project Completed

30w 5v 8a open frame power supply attached to 3d printed mount connect directly to RaspberryPi that overclocked at Turbo Preset running OctoPrint .

New Moto " One Project at a time"

8b5d9c53ec5e7f038cdc1dce73d8495d.jpeg
8b5d9c53ec5e7f038cdc1dce73d8495d.jpeg1920×2560 661 KB

b6ab9c9933135bab78ebbb4c913c7f00.jpeg
b6ab9c9933135bab78ebbb4c913c7f00.jpeg4160×3120 1.98 MB

c027088d6c0b9d06a98960dac2b74441.jpeg
c027088d6c0b9d06a98960dac2b74441.jpeg1920×2560 758 KB

1b36d35a1f173b1d19417e30826b1e4c.jpeg
1b36d35a1f173b1d19417e30826b1e4c.jpeg1920×2560 865 KB

2

Is that psu a custom made?

3

@Dat_Chu http://www.xppower.com/EN/100527/ECS25-60-Series i bought about 12 5v and 12 12v openframe power supplies for my future projects

4

Are sure that is enough power for that Raspberry Pi? :slight_smile: (Looks like you could run a couple dozen of them off it!)

And when are you upgrading to the RPi2?

5

@William_Steele LOL

6

@William_Steele if you need one or two of them just tell me as its on the house for you as always.