Originally shared by Peter Parnes After all the trouble with my dual print head

3D Printing
,
1

Originally shared by Peter Parnes

After all the trouble with my dual print head setup, I got one print head on my @Ultimaker working yesterday and made a small print which worked fine. Started a bigger test to run over night and here is the result. Apparently the fan got stuck behind the print bed. Notice the missing fan blades. Both screws that should hold it are under the print bed.

10ca5bad92090f70f1ff887074407697.jpeg
10ca5bad92090f70f1ff887074407697.jpeg1530×2048 430 KB

e88c5706685ff7954978ff9228d3bc6f.jpeg
e88c5706685ff7954978ff9228d3bc6f.jpeg1530×2048 547 KB

2

Now you’ll have to print yourself a fan :wink:

3

Whoa… Looks like somebody cut your break lines!

4

Doh

5

WTF. This looks like black magic, i don’t know how to do this with my Ultimaker…

6

Ouch. Did it manage to damage anything else, or just destroy the fan?

7

Nothing else damaged. Cannot even find any marks on the print bed where it got stuck.