Originally shared by Scojet, Inc.

Scojet_Inc · August 29, 2013, 2:03pm

Originally shared by Scojet, Inc.

Scan, mill and 3D print in one? We wouldn’t mind! Would you?

Check out the FABtotum Personal Fabricator. http://tiny.cc/y5yk2w

#manufacturing #3dprinting #workstation

Shachar_Weis · August 29, 2013, 2:38pm

I would very much mind, yes. Especially when I am presented with a mill that has no ventilation or dust management. A 3D printer full of dust and wood chips… Mmmmm… no thanks.

Alessandro_Bertolucc · August 29, 2013, 2:52pm

I’m not convinced it will work well enough with or without dust-management. Either it one or the other - I can’t believe it can do both effectively.

4Chan_4Prez · August 29, 2013, 2:56pm

Looks small, kinda neat idea though. I could see making a head with a extruder on one side and a mill on the other. would need a lense cap for the scanner cameras and lasers.

Alex_Okita · August 30, 2013, 5:38am

would be cool to extrude a few layers, mill some fine details, repeat for high fidelity 3d models. this was something i started investigating a few months ago. hopefully, im not the only person who has wanted to try this out.