Smartcore getting in shape. It moves and homes in XY.

3D Printing
,
1

Smartcore getting in shape. It moves and homes in XY.
Updated @Jerry_Barr ​​ dual hotend mount to fit 2 pico hotends and sensor on back.

Yesterday I received 12x12 in @GeckoTek ​​ plate that will in this printer. Plate will be held by small neomagners, should easyup removal.

Can’t wait to wire this up and run.
Small issue I noticed that bed is too low in its highest position, I expected that after quick design for threaded z axis, for now I will use brick/book to rise bed. Expect updated z axis carriage in few weeks.

b94a11c2ef71775030a00f6e832744dd.jpeg
b94a11c2ef71775030a00f6e832744dd.jpeg4128×2322 1.17 MB

8838bd043cb0501995e270392ae4f264.jpeg
8838bd043cb0501995e270392ae4f264.jpeg4128×2322 993 KB

b26af02ea37a0a5e0856f50617a6ecf5.jpeg
b26af02ea37a0a5e0856f50617a6ecf5.jpeg4128×2322 559 KB

2

Nice work , was working on sensor to back move myself. With the z on back it is in the way though. For now I’ll keep it up front. At least until I turn my z 90 degrees.

3

@Jerry_Barr ​ I took idea from your video, no need for zip-tights.