this is weird? Why does Cura Start printing the part before the skirt? tried different setting can’t seem to get any results.
Any idea what is going on.
gcode file
https://www.dropbox.com/s/ysmccpkdjxwx5ut/thing-115200.gcode?dl=0
Doesn’t seem like it would make any difference to the purpose of the skirt.
Here’s a video of my printer printing today. middle of the print it stops and retracts for about 2 minutes. and then it starts back up but theres no filament in the extruder to print with.
I now it not my start gcode
Here’s my start gcode.
;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
M208 S-0.05 F180
M207 S1 F1800
G1 Z15
G92 E0
G1 E12.5 F100
G92 E0
and Here’s the full gcode file.
https://www.dropbox.com/s/dbizosmg99lwbo1/Spool_holder3.gcode?dl=0
Here’s the video of me trying to push the filament back in but its still retracting.
https://www.dropbox.com/s/diu8n4asy0a4l8a/VID_20170228_140637215.mp4?dl=0
@Glenn_Beer @Arthur_Wolf
So I was looking at my gcode again.
and I find this. would this cause a problem. like with the filament coming out of the extruder?
G1 F1200 X147.880 Y112.334 E10044.40612
G0 F4800 X145.559 Y111.618
G1 F1200 X144.699 Y110.758 E10044.47196
G1 F150000 E10043.47196
G1 Z30.100
G0 F4800 X126.462 Y115.148
G1 Z29.100
G1 F150000 E10044.47196
G92 E0
G1 F1200 X125.996 Y114.682 E0.03568
G0 F4800 X120.927 Y120.683
G0 X118.818 Y124.100
G0 X116.418 Y127.731
G1 F1200 X116.946 Y128.259 E0.07610
G0 F4800 X116.159 Y134.460
G0 X116.551 Y139.336
G0 X117.316 Y142.898
G1 F1200 X116.792 Y143.422 E0.11621