Using http://www.machinekit.io/ and #BeagleBoneBlack plus #Replicape or #BeBoPr to build a #3DPrinter ? Well, now you can print Boris, the @BeagleBoard.org mascot!
I just got some tiny test prints from @Shapeways1 and they looked good, so I scaled up the model and uploaded it to Thingiverse. The picture below has a USB thumb drive of Boris (previously available on http://boardzoo.com/, but currently out of production) that was used as a reference and 4 miniature test prints in different materials (WSF, EP, BD, and ALU, respectively).
Have fun and share lots of pictures of your prints! Please share back any improvements to the model.
cc: @Adafruit_Industries @Logic_Supply @SparkFun_Electronics @element14 @Drew_Fustini_pdp7
