Well that's interesting 😄

3D Printing
,
1

Well that’s interesting :smile:

4fc5cb9810a43300cb863fcd2961c833.jpeg
4fc5cb9810a43300cb863fcd2961c833.jpeg3840×2160 1.33 MB

2

@3D_Printing_Nerd has one!

3

That would have to move pretty quickly, wouldn’t it?

4

Saw one on a tour of The Foundry makerspace on vacation in Baltimore. Wife was there, said NO! Before I could even say anything. About $300 US iirc

5

You know you have too much money when… :slight_smile:

Actually shouldn’t be that hard to build your own. Replace the heated bed with a small griddle, and the extruder with a servo-driven syringe. Then again, you could probably freehand it, considering the “maximum resolution” that could be attained.

Now if someone comes up with a deep fryer version so I can have a 3D Eiffel Tower funnel cake – "take my money!*

6

You don’t turn it on until it’s done printing …

7

@Brad_Hill actually you do. Because you achieve different levels of browning allowing for different “colors”

8

Interesting I was assuming they would change out colored batter.