What kind of 3D printer do you have?
You need the sealed build chamber to get good results with ABS on large parts; that and good quality filament.
I’ve found the combination of a brim, “ABS slurry”, and a buildplate heated to 100C is adequate for printing with no warping. Emphasis on the slurry.
Slurry is fine, but acetone is dangerous in general. I would suggest liquid vinyl which can be found in the form of Aquanet Super Hold non-scented hairspray. Same temperatures. Works amazing. I usually start @ 100C and drop to 90c after the first layer.
It’s nice to see this poll is still kicking.